Pagina 1 di 2 12 UltimaUltima
Risultati da 1 a 15 di 17

Discussione: Ubuntu e problema scheda audio

  1. #1

    Title
    Nuovo Utente
    Data Registrazione
    Jun 2009
    Età
    77
    Messaggi
    9

    Question Ubuntu e problema scheda audio

    Salve a tutti, sono approdato ieri sera ad Ubuntu dopo avere avuto diversi problemi di blocchi, ritardi ed altre scocciature varie con Windows XP.
    Pensavo di avere un sacco di problemi con l'installazione delle periferiche e invece, miracolo, tutto è stato semplice come non mi sarei mai aspettato.
    Stampante, modem, webcam, nulla ha avuto bisogno dei vari dischetti di installazione.
    L'unico problema che non sono riuscito a risolvere è quello relatovo all'audio.
    La mia scheda madre Asus ha integrato il Realtek AC97, ma ancora non sono riuscito a produrre alcun suono. Qualcuno può darmi qualche suggerimento per risolvere il problema?
    Grazie e cordiali saluti a tutti.
    Giuseppe

  2. #2
    L'avatar di Carlo
    Title
    Nerd
    Data Registrazione
    Oct 2006
    Età
    37
    Messaggi
    6,718

    Predefinito

    Citazione Originariamente Scritto da peppino29 Visualizza Messaggio
    Salve a tutti, sono approdato ieri sera ad Ubuntu dopo avere avuto diversi problemi di blocchi, ritardi ed altre scocciature varie con Windows XP.
    Pensavo di avere un sacco di problemi con l'installazione delle periferiche e invece, miracolo, tutto è stato semplice come non mi sarei mai aspettato.
    Stampante, modem, webcam, nulla ha avuto bisogno dei vari dischetti di installazione.
    L'unico problema che non sono riuscito a risolvere è quello relatovo all'audio.
    La mia scheda madre Asus ha integrato il Realtek AC97, ma ancora non sono riuscito a produrre alcun suono. Qualcuno può darmi qualche suggerimento per risolvere il problema?
    Grazie e cordiali saluti a tutti.
    Giuseppe
    prova a collegare linux ad internet e fai installare i driver necessari direttamente dall'installer di linux

  3. #3

    Title
    Nuovo Utente
    Data Registrazione
    Jun 2009
    Età
    77
    Messaggi
    9

    Unhappy richiesta aiuto

    Salve a tutti,
    innanzitutto ringrazio Carlo Panceri per la cortese risposta.
    Vorrei pregarti, visto che sono approdato soltanto da due giorni su Ubuntu, di essere così cortese da spiegare in maniera semplice, dato che non conosco termini e procedure ,come attivare l'audio e come fare funzionare il masterizzatore Brasero (devo masterizzare dei filmati che ho su un HD esterno).
    Grazie per la pazienza.
    Buona giornata.
    Giuseppe

  4. #4
    L'avatar di Carlo
    Title
    Nerd
    Data Registrazione
    Oct 2006
    Età
    37
    Messaggi
    6,718

    Predefinito

    potresti indicarmi il modello esatto della tua scheda madre?

  5. #5

    Title
    Nuovo Utente
    Data Registrazione
    Jun 2009
    Età
    77
    Messaggi
    9

    Predefinito richiesta di aiuto

    La scheda madre è: Asus K8N.
    Ancora grazie e cordiali saluti.
    Giuseppe

  6. #6
    L'avatar di Lomion
    Title
    Esperto
    Data Registrazione
    Dec 2007
    Età
    39
    Messaggi
    1,396

    Predefinito

    Ciao Peppino!

    Hai l'icona relativa all'audio nel vassoio di sistema in alto a destra?
    Se si prova a controllare che il volume non sia a zero e magari dovrai alzare i canali PCM o Front/Center nel mixer audio
    E adesso aspetterò domani per avere nostalgia
    signora libertà signorina anarchia
    così preziosa come il vino così gratis come la tristezza, con la tua nuvola di dubbi e di bellezza.

  7. #7

    Title
    Nuovo Utente
    Data Registrazione
    Jun 2009
    Età
    77
    Messaggi
    9

    Predefinito richiesta aiuto

    L'icona con l'altoparlante è presente in alto a dx.
    Se ci clicco sopra con il tasto dx noto che il mute non è spuntato, e se apro il controllo di volume vedo che tutti i volumi sono al massimo.
    Se vado su System, Preferenze, Audio, ho scelto ALSA fra le preferenze, ma il test non dà risultato udibile.
    Se vado su Rythmbox e inserisco un CD nel lettore, vedo che mi appare l'indicazione "not playing".
    Help, help, help!!
    Ciao e grazie.
    Giuseppe

  8. #8
    L'avatar di Lomion
    Title
    Esperto
    Data Registrazione
    Dec 2007
    Età
    39
    Messaggi
    1,396

    Predefinito

    Citazione Originariamente Scritto da peppino29 Visualizza Messaggio
    L'icona con l'altoparlante è presente in alto a dx.
    Se ci clicco sopra con il tasto dx noto che il mute non è spuntato, e se apro il controllo di volume vedo che tutti i volumi sono al massimo.
    Se vado su System, Preferenze, Audio, ho scelto ALSA fra le preferenze, ma il test non dà risultato udibile.
    Se vado su Rythmbox e inserisco un CD nel lettore, vedo che mi appare l'indicazione "not playing".
    Help, help, help!!
    Ciao e grazie.
    Giuseppe
    Mmm... Adesso ti cheiderò di mettere dei comandi in un terminale e di postare il risultato. So che il terminale non è molto amato, ma è la via più veloce per ricavare una marea di informazioni.

    Apri uno gnome-terminal e scrivici dentro
    Codice:
    dmesg
    Poi posta che ti da come output qui ;) (magari sotto spoiler )
    E adesso aspetterò domani per avere nostalgia
    signora libertà signorina anarchia
    così preziosa come il vino così gratis come la tristezza, con la tua nuvola di dubbi e di bellezza.

  9. #9

    Title
    Nuovo Utente
    Data Registrazione
    Jun 2009
    Età
    77
    Messaggi
    9

    Predefinito richiesta aiuto

    Innanzi tutto ti ringrazio per la pazienza che stai dimostrando nell'aiutarmi.
    Ti allego il risultato del comando che mi hai suggerito, purtroppo non sotto spoiler perchè non cosa significhi essendo approdato da circa una settimana su ubuntu.
    Spoiler:
    Giuseppe 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.004000] allocated 5241280 bytes of page_cgroup
    [ 0.004000] please try cgroup_disable=memory option if you don't want
    [ 0.004000] Scanning for low memory corruption every 60 seconds
    [ 0.004000] Memory: 1018316k/1048320k available (4126k kernel code, 29248k reserved, 2208k data, 532k init, 143112k highmem)
    [ 0.004000] virtual kernel memory layout:
    [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
    [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
    [ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
    [ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
    [ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB)
    [ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB)
    [ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB)
    [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    [ 0.004011] Calibrating delay loop (skipped), value calculated using timer frequency.. 3215.66 BogoMIPS (lpj=6431332)
    [ 0.004034] Security Framework initialized
    [ 0.004044] SELinux: Disabled at boot.
    [ 0.004072] AppArmor: AppArmor initialized
    [ 0.004081] Mount-cache hash table entries: 512
    [ 0.004225] Initializing cgroup subsys ns
    [ 0.004229] Initializing cgroup subsys cpuacct
    [ 0.004232] Initializing cgroup subsys memory
    [ 0.004237] Initializing cgroup subsys freezer
    [ 0.004250] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    [ 0.004253] CPU: L2 Cache: 128K (64 bytes/line)
    [ 0.004268] Checking 'hlt' instruction... OK.
    [ 0.020613] SMP alternatives: switching to UP code
    [ 0.162974] Freeing SMP alternatives: 18k freed
    [ 0.162980] ACPI: Core revision 20080926
    [ 0.164628] ACPI: Checking initramfs for custom DSDT
    [ 0.520538] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
    [ 0.560941] CPU0: AMD Engineering Sample xx stepping 02
    [ 0.564002] Brought up 1 CPUs
    [ 0.564002] Total of 1 processors activated (3215.66 BogoMIPS).
    [ 0.564002] CPU0 attaching NULL sched-domain.
    [ 0.564002] net_namespace: 776 bytes
    [ 0.564002] Booting paravirtualized kernel on bare hardware
    [ 0.564002] Time: 5:59:23 Date: 06/09/09
    [ 0.564002] regulator: core version 0.5
    [ 0.564002] NET: Registered protocol family 16
    [ 0.564002] EISA bus registered
    [ 0.564002] ACPI: bus type pci registered
    [ 0.564002] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
    [ 0.564002] PCI: Using configuration type 1 for base access
    [ 0.564002] ACPI: EC: Look up EC in DSDT
    [ 0.570033] ACPI: Interpreter enabled
    [ 0.570041] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.570064] ACPI: Using IOAPIC for interrupt routing
    [ 0.579557] ACPI: No dock devices found.
    [ 0.579628] ACPI: PCI Root Bridge [PCI0] (0000:00)
    [ 0.579687] pci 0000:00:00.0: reg 10 32bit mmio: [0xc0000000-0xdfffffff]
    [ 0.579752] pci 0000:00:01.1: reg 10 io port: [0x5080-0x509f]
    [ 0.579762] pci 0000:00:01.1: reg 20 io port: [0x5000-0x503f]
    [ 0.579766] pci 0000:00:01.1: reg 24 io port: [0x5040-0x507f]
    [ 0.579775] pci 0000:00:01.1: PME# supported from D3hot D3cold
    [ 0.579778] pci 0000:00:01.1: PME# disabled
    [ 0.579798] pci 0000:00:02.0: reg 10 32bit mmio: [0xff6fd000-0xff6fdfff]
    [ 0.579815] pci 0000:00:02.0: supports D1 D2
    [ 0.579817] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.579820] pci 0000:00:02.0: PME# disabled
    [ 0.579836] pci 0000:00:02.1: reg 10 32bit mmio: [0xff6fe000-0xff6fefff]
    [ 0.579852] pci 0000:00:02.1: supports D1 D2
    [ 0.579854] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.579858] pci 0000:00:02.1: PME# disabled
    [ 0.579877] pci 0000:00:02.2: reg 10 32bit mmio: [0xff6ffc00-0xff6ffcff]
    [ 0.579895] pci 0000:00:02.2: supports D1 D2
    [ 0.579897] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.579900] pci 0000:00:02.2: PME# disabled
    [ 0.579924] pci 0000:00:05.0: reg 10 32bit mmio: [0xff6fc000-0xff6fcfff]
    [ 0.579929] pci 0000:00:05.0: reg 14 io port: [0xec00-0xec07]
    [ 0.579943] pci 0000:00:05.0: supports D1 D2
    [ 0.579945] pci 0000:00:05.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.579949] pci 0000:00:05.0: PME# disabled
    [ 0.579964] pci 0000:00:06.0: reg 10 io port: [0xe800-0xe8ff]
    [ 0.579968] pci 0000:00:06.0: reg 14 io port: [0xe400-0xe47f]
    [ 0.579973] pci 0000:00:06.0: reg 18 32bit mmio: [0xff6fb000-0xff6fbfff]
    [ 0.579986] pci 0000:00:06.0: supports D1 D2
    [ 0.580022] pci 0000:00:08.0: reg 20 io port: [0xffa0-0xffaf]
    [ 0.580046] pci 0000:00:0a.0: reg 10 io port: [0x9f0-0x9f7]
    [ 0.580050] pci 0000:00:0a.0: reg 14 io port: [0xbf0-0xbf3]
    [ 0.580055] pci 0000:00:0a.0: reg 18 io port: [0x970-0x977]
    [ 0.580059] pci 0000:00:0a.0: reg 1c io port: [0xb70-0xb73]
    [ 0.580063] pci 0000:00:0a.0: reg 20 io port: [0xc800-0xc80f]
    [ 0.580068] pci 0000:00:0a.0: reg 24 io port: [0xc400-0xc47f]
    [ 0.580207] pci 0000:01:00.0: reg 10 32bit mmio: [0xb0000000-0xb7ffffff]
    [ 0.580214] pci 0000:01:00.0: reg 14 io port: [0xb800-0xb8ff]
    [ 0.580220] pci 0000:01:00.0: reg 18 32bit mmio: [0xff5f0000-0xff5fffff]
    [ 0.580237] pci 0000:01:00.0: reg 30 32bit mmio: [0xff5c0000-0xff5dffff]
    [ 0.580247] pci 0000:01:00.0: supports D1 D2
    [ 0.580273] pci 0000:01:00.1: reg 10 32bit mmio: [0xa8000000-0xafffffff]
    [ 0.580279] pci 0000:01:00.1: reg 14 32bit mmio: [0xff5e0000-0xff5effff]
    [ 0.580305] pci 0000:01:00.1: supports D1 D2
    [ 0.580346] pci 0000:00:0b.0: bridge io port: [0xb000-0xbfff]
    [ 0.580350] pci 0000:00:0b.0: bridge 32bit mmio: [0xff500000-0xff5fffff]
    [ 0.580354] pci 0000:00:0b.0: bridge 32bit mmio pref: [0x9eb00000-0xbeafffff]
    [ 0.580395] bus 00 -> node 0
    [ 0.580402] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.580635] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    [ 0.586923] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
    [ 0.587153] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
    [ 0.587379] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
    [ 0.587605] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
    [ 0.587830] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *11
    [ 0.588071] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *3
    [ 0.588301] ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *9
    [ 0.588522] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *10
    [ 0.588743] ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *9
    [ 0.588964] ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *10
    [ 0.589185] ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
    [ 0.589406] ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled.
    [ 0.589628] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *0
    [ 0.589859] ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *0, disabled.
    [ 0.590131] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *14
    [ 0.590235] ACPI: Power Resource [ISAV] (on)
    [ 0.590312] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 9E, should be 70 [20080926]
    [ 0.590336] ACPI: WMI: Mapper loaded
    [ 0.590563] SCSI subsystem initialized
    [ 0.590607] libata version 3.00 loaded.
    [ 0.590656] usbcore: registered new interface driver usbfs
    [ 0.590675] usbcore: registered new interface driver hub
    [ 0.590702] usbcore: registered new device driver usb
    [ 0.590816] PCI: Using ACPI for IRQ routing
    [ 0.590909] Bluetooth: Core ver 2.13
    [ 0.590909] NET: Registered protocol family 31
    [ 0.590909] Bluetooth: HCI device and connection manager initialized
    [ 0.590909] Bluetooth: HCI socket layer initialized
    [ 0.590909] NET: Registered protocol family 8
    [ 0.590909] NET: Registered protocol family 20
    [ 0.590909] NetLabel: Initializing
    [ 0.590909] NetLabel: domain hash size = 128
    [ 0.590909] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.590909] NetLabel: unlabeled traffic allowed by default
    [ 0.590909] AppArmor: AppArmor Filesystem Enabled
    [ 0.590909] pnp: PnP ACPI init
    [ 0.590909] ACPI: bus type pnp registered
    [ 0.597340] pnp: PnP ACPI: found 15 devices
    [ 0.597344] ACPI: ACPI bus type pnp unregistered
    [ 0.597349] PnPBIOS: Disabled by ACPI PNP
    [ 0.597366] system 00:08: ioport range 0x190-0x193 has been reserved
    [ 0.597369] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
    [ 0.597376] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
    [ 0.597380] system 00:09: iomem range 0xfee00000-0xfeefffff could not be reserved
    [ 0.597383] system 00:09: iomem range 0xff780000-0xff7bffff has been reserved
    [ 0.597390] system 00:0b: ioport range 0x480-0x487 has been reserved
    [ 0.597393] system 00:0b: ioport range 0xd00-0xd07 has been reserved
    [ 0.597400] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
    [ 0.597404] system 00:0e: iomem range 0xc0000-0xdffff could not be reserved
    [ 0.597407] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
    [ 0.597410] system 00:0e: iomem range 0x100000-0x3fffffff could not be reserved
    [ 0.597414] system 00:0e: iomem range 0xff7c0000-0xffffffff has been reserved
    [ 0.632146] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:01
    [ 0.632150] pci 0000:00:0b.0: IO window: 0xb000-0xbfff
    [ 0.632156] pci 0000:00:0b.0: MEM window: 0xff500000-0xff5fffff
    [ 0.632160] pci 0000:00:0b.0: PREFETCH window: 0x0000009eb00000-0x000000beafffff
    [ 0.632166] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:02
    [ 0.632168] pci 0000:00:0e.0: IO window: disabled
    [ 0.632172] pci 0000:00:0e.0: MEM window: disabled
    [ 0.632175] pci 0000:00:0e.0: PREFETCH window: disabled
    [ 0.632187] pci 0000:00:0e.0: setting latency timer to 64
    [ 0.632191] bus: 00 index 0 io port: [0x00-0xffff]
    [ 0.632194] bus: 00 index 1 mmio: [0x000000-0xffffffff]
    [ 0.632196] bus: 01 index 0 io port: [0xb000-0xbfff]
    [ 0.632199] bus: 01 index 1 mmio: [0xff500000-0xff5fffff]
    [ 0.632201] bus: 01 index 2 mmio: [0x9eb00000-0xbeafffff]
    [ 0.632204] bus: 01 index 3 mmio: [0x0-0x0]
    [ 0.632206] bus: 02 index 0 mmio: [0x0-0x0]
    [ 0.632208] bus: 02 index 1 mmio: [0x0-0x0]
    [ 0.632210] bus: 02 index 2 mmio: [0x0-0x0]
    [ 0.632212] bus: 02 index 3 mmio: [0x0-0x0]
    [ 0.632227] NET: Registered protocol family 2
    [ 0.632372] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.632728] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.633658] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.634116] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.634119] TCP reno registered
    [ 0.634233] NET: Registered protocol family 1
    [ 0.634389] checking if image is initramfs... it is
    [ 1.136043] Switched to high resolution mode on CPU 0
    [ 1.355815] Freeing initrd memory: 7364k freed
    [ 1.355922] cpufreq: No nForce2 chipset.
    [ 1.356088] audit: initializing netlink socket (disabled)
    [ 1.356106] type=2000 audit(1244527162.356:1): initialized
    [ 1.365713] highmem bounce pool size: 64 pages
    [ 1.365719] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 1.367050] VFS: Disk quotas dquot_6.5.1
    [ 1.367117] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 1.367789] fuse init (API version 7.10)
    [ 1.367883] msgmni has been set to 1724
    [ 1.368128] alg: No test for stdrng (krng)
    [ 1.368142] io scheduler noop registered
    [ 1.368144] io scheduler anticipatory registered
    [ 1.368146] io scheduler deadline registered
    [ 1.368173] io scheduler cfq registered (default)
    [ 1.400073] pci 0000:01:00.0: Boot video device
    [ 1.406080] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 1.406090] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 1.406231] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
    [ 1.406234] ACPI: Power Button (FF) [PWRF]
    [ 1.406288] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
    [ 1.406291] ACPI: Power Button (CM) [PWRB]
    [ 1.406528] processor ACPI_CPU:00: registered as cooling_device0
    [ 1.410226] isapnp: Scanning for PnP cards...
    [ 1.763696] isapnp: No Plug & Play device found
    [ 1.764943] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
    [ 1.765033] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 1.765406] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 1.766195] brd: module loaded
    [ 1.766539] loop: module loaded
    [ 1.766651] Fixed MDIO Bus: probed
    [ 1.766658] PPP generic driver version 2.4.2
    [ 1.766725] input: Macintosh mouse button emulation as /devices/virtual/input/input2
    [ 1.766762] Driver 'sd' needs updating - please use bus_type methods
    [ 1.766771] Driver 'sr' needs updating - please use bus_type methods
    [ 1.766960] sata_nv 0000:00:0a.0: version 3.5
    [ 1.767420] ACPI: PCI Interrupt Link [LTID] BIOS reported IRQ 0, using IRQ 22
    [ 1.767423] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22
    [ 1.767435] sata_nv 0000:00:0a.0: PCI INT A -> Link[LTID] -> GSI 22 (level, low) -> IRQ 22
    [ 1.767479] sata_nv 0000:00:0a.0: setting latency timer to 64
    [ 1.767593] scsi0 : sata_nv
    [ 1.767707] scsi1 : sata_nv
    [ 1.768597] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xc800 irq 22
    [ 1.768601] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xc808 irq 22
    [ 2.392110] pata_amd 0000:00:08.0: version 0.3.10
    [ 2.392159] pata_amd 0000:00:08.0: power state changed by ACPI to D0
    [ 2.392207] pata_amd 0000:00:08.0: setting latency timer to 64
    [ 2.392301] scsi2 : pata_amd
    [ 2.392375] scsi3 : pata_amd
    [ 2.393317] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
    [ 2.393320] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
    [ 2.565778] ata3.00: ATA-7: Maxtor 6L120P0, BAH41G10, max UDMA/133
    [ 2.565781] ata3.00: 240121728 sectors, multi 16: LBA
    [ 2.565816] ata3.01: ATAPI: SAMSUNG CD-R/RW SW-252B, R700, max UDMA/33
    [ 2.565846] ata3: nv_mode_filter: 0x7f39f&0x7f01f->0x7f01f, BIOS=0x7f000 (0xc7c0c000) ACPI=0x7f01f (15:60:0x1f)
    [ 2.565852] ata3: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc7c0c000) ACPI=0x701f (15:60:0x1f)
    [ 2.581923] ata3.00: configured for UDMA/133
    [ 2.598528] ata3.01: configured for UDMA/33
    [ 2.760287] ata4.00: ATAPI: PIONEER DVD-RW DVR-111D, 1.29, max UDMA/66
    [ 2.760312] ata4: nv_mode_filter: 0x1f39f&0x701f->0x701f, BIOS=0x7000 (0xc7c0c000) ACPI=0x701f (60:600:0x13)
    [ 2.776242] ata4.00: configured for UDMA/33
    [ 2.782322] scsi 2:0:0:0: Direct-Access ATA Maxtor 6L120P0 BAH4 PQ: 0 ANSI: 5
    [ 2.782440] sd 2:0:0:0: [sda] 240121728 512-byte hardware sectors: (122 GB/114 GiB)
    [ 2.782458] sd 2:0:0:0: [sda] Write Protect is off
    [ 2.782461] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.782489] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.782567] sd 2:0:0:0: [sda] 240121728 512-byte hardware sectors: (122 GB/114 GiB)
    [ 2.782582] sd 2:0:0:0: [sda] Write Protect is off
    [ 2.782585] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.782611] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.782617] sda: sda1 sda2 < sda5 >
    [ 2.820570] sd 2:0:0:0: [sda] Attached SCSI disk
    [ 2.820634] sd 2:0:0:0: Attached scsi generic sg0 type 0
    [ 2.822616] scsi 2:00: CD-ROM SAMSUNG CD-R/RW SW-252B R700 PQ: 0 ANSI: 5
    [ 2.824197] sr0: scsi3-mmc drive: 40x/52x writer cd/rw xa/form2 cdda tray
    [ 2.824201] Uniform CD-ROM driver Revision: 3.20
    [ 2.824328] sr 2:00: Attached scsi CD-ROM sr0
    [ 2.824381] sr 2:00: Attached scsi generic sg1 type 5
    [ 2.831051] scsi 3:0:0:0: CD-ROM PIONEER DVD-RW DVR-111D 1.29 PQ: 0 ANSI: 5
    [ 2.849333] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
    [ 2.849424] sr 3:0:0:0: Attached scsi CD-ROM sr1
    [ 2.849471] sr 3:0:0:0: Attached scsi generic sg2 type 5
    [ 2.849992] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 2.850397] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 21
    [ 2.850409] ehci_hcd 0000:00:02.2: PCI INT C -> Link[LUS2] -> GSI 21 (level, low) -> IRQ 21
    [ 2.850440] ehci_hcd 0000:00:02.2: setting latency timer to 64
    [ 2.850444] ehci_hcd 0000:00:02.2: EHCI Host Controller
    [ 2.850525] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
    [ 2.850555] ehci_hcd 0000:00:02.2: debug port 1
    [ 2.850559] ehci_hcd 0000:00:02.2: cache line size of 64 is not supported
    [ 2.850579] ehci_hcd 0000:00:02.2: irq 21, io mem 0xff6ffc00
    [ 2.860018] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
    [ 2.860099] usb usb1: configuration #1 chosen from 1 choice
    [ 2.860129] hub 1-0:1.0: USB hub found
    [ 2.860139] hub 1-0:1.0: 8 ports detected
    [ 2.860265] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 2.860639] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
    [ 2.860649] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IRQ 20
    [ 2.860673] ohci_hcd 0000:00:02.0: setting latency timer to 64
    [ 2.860677] ohci_hcd 0000:00:02.0: OHCI Host Controller
    [ 2.860737] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
    [ 2.860775] ohci_hcd 0000:00:02.0: irq 20, io mem 0xff6fd000
    [ 2.918076] usb usb2: configuration #1 chosen from 1 choice
    [ 2.918110] hub 2-0:1.0: USB hub found
    [ 2.918121] hub 2-0:1.0: 4 ports detected
    [ 2.918551] ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 22
    [ 2.918556] ohci_hcd 0000:00:02.1: PCI INT B -> Link[LUS1] -> GSI 22 (level, low) -> IRQ 22
    [ 2.918576] ohci_hcd 0000:00:02.1: setting latency timer to 64
    [ 2.918580] ohci_hcd 0000:00:02.1: OHCI Host Controller
    [ 2.918635] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
    [ 2.918652] ohci_hcd 0000:00:02.1: irq 22, io mem 0xff6fe000
    [ 2.974058] usb usb3: configuration #1 chosen from 1 choice
    [ 2.974090] hub 3-0:1.0: USB hub found
    [ 2.974101] hub 3-0:1.0: 4 ports detected
    [ 2.974206] uhci_hcd: USB Universal Host Controller Interface driver
    [ 2.974286] usbcore: registered new interface driver libusual
    [ 2.974323] usbcore: registered new interface driver usbserial
    [ 2.974335] USB Serial support registered for generic
    [ 2.974349] usbcore: registered new interface driver usbserial_generic
    [ 2.974352] usbserial: USB Serial Driver core
    [ 2.974398] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [ 2.974401] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [ 2.974741] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 2.974875] mice: PS/2 mouse device common for all mice
    [ 2.975009] rtc_cmos 00:02: RTC can wake from S4
    [ 2.975048] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 2.975073] rtc0: alarms up to one year, y3k, 114 bytes nvram
    [ 2.975154] device-mapper: uevent: version 1.0.3
    [ 2.975290] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [Solo gli utenti registrati possono vedere questo collegamento. ]
    [ 2.975341] device-mapper: multipath: version 1.0.5 loaded
    [ 2.975344] device-mapper: multipath round-robin: version 1.0.0 loaded
    [ 2.975439] EISA: Probing bus 0 at eisa.0
    [ 2.975454] Cannot allocate resource for EISA slot 4
    [ 2.975457] Cannot allocate resource for EISA slot 5
    [ 2.975465] EISA: Detected 0 cards.
    [ 2.975498] cpuidle: using governor ladder
    [ 2.975501] cpuidle: using governor menu
    [ 2.976095] TCP cubic registered
    [ 2.976203] NET: Registered protocol family 10
    [ 2.976641] lo: Disabled Privacy Extensions
    [ 2.976988] NET: Registered protocol family 17
    [ 2.977012] Bluetooth: L2CAP ver 2.11
    [ 2.977014] Bluetooth: L2CAP socket layer initialized
    [ 2.977017] Bluetooth: SCO (Voice Link) ver 0.6
    [ 2.977019] Bluetooth: SCO socket layer initialized
    [ 2.977075] Bluetooth: RFCOMM socket layer initialized
    [ 2.977084] Bluetooth: RFCOMM TTY layer initialized
    [ 2.977086] Bluetooth: RFCOMM ver 1.10
    [ 2.977119] powernow-k8: Power state transitions not supported
    [ 2.977151] Using IPI No-Shortcut mode
    [ 2.977252] registered taskstats version 1
    [ 2.977384] Magic number: 13:644:971
    [ 2.977477] rtc_cmos 00:02: setting system clock to 2009-06-09 05:59:26 UTC (1244527166)
    [ 2.977481] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [ 2.977483] EDD information not available.
    [ 2.977982] Freeing unused kernel memory: 532k freed
    [ 2.978140] Write protecting the kernel text: 4128k
    [ 2.978192] Write protecting the kernel read-only data: 1532k
    [ 3.014466] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
    [ 3.176041] usb 1-1: new high speed USB device using ehci_hcd and address 2
    [ 3.318442] usb 1-1: configuration #1 chosen from 1 choice
    [ 3.488043] usb 1-4: new high speed USB device using ehci_hcd and address 4
    [ 3.532037] Floppy drive(s): fd0 is 1.44M
    [ 3.552066] FDC 0 is a post-1991 82077
    [ 3.621176] usb 1-4: configuration #1 chosen from 1 choice
    [ 3.627661] Initializing USB Mass Storage driver...
    [ 3.630040] scsi4 : SCSI emulation for USB Mass Storage devices
    [ 3.631270] usbcore: registered new interface driver usb-storage
    [ 3.631276] USB Mass Storage support registered.
    [ 3.631404] usb-storage: device found at 4
    [ 3.631406] usb-storage: waiting for device to settle before scanning
    [ 3.683483] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
    [ 3.683858] ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 21
    [ 3.683864] forcedeth 0000:00:05.0: PCI INT A -> Link[LKLN] -> GSI 21 (level, low) -> IRQ 21
    [ 3.683870] forcedeth 0000:00:05.0: setting latency timer to 64
    [ 3.683951] nv_probe: set workaround bit for reversed mac addr
    [ 3.733089] usb 1-5: new high speed USB device using ehci_hcd and address 5
    [ 3.879300] usb 1-5: configuration #1 chosen from 1 choice
    [ 3.889328] scsi5 : SCSI emulation for USB Mass Storage devices
    [ 3.890028] usb-storage: device found at 5
    [ 3.890031] usb-storage: waiting for device to settle before scanning
    [ 4.192091] usb 2-2: new low speed USB device using ohci_hcd and address 2
    [ 4.204983] forcedeth 0000:00:05.0: ifname eth0, PHY OUI 0x90c3 @ 1, addr 00:13:d4:65:59:6c
    [ 4.204990] forcedeth 0000:00:05.0: csum timirq lnktim desc-v2
    [ 4.406137] usb 2-2: configuration #1 chosen from 1 choice
    [ 4.488582] usbcore: registered new interface driver hiddev
    [ 4.501401] input: HID 04d9:1133 as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input4
    [ 4.501819] generic-usb 0003:04D9:1133.0001: input,hidraw0: USB HID v1.10 Mouse [HID 04d9:1133] on usb-0000:00:02.0-2/input0
    [ 4.501843] usbcore: registered new interface driver usbhid
    [ 4.501847] usbhid: v2.6:USB HID core driver
    [ 4.606129] PM: Starting manual resume from disk
    [ 4.606136] PM: Resume from partition 8:5
    [ 4.606138] PM: Checking hibernation image.
    [ 4.606339] PM: Resume from disk failed.
    [ 4.654030] kjournald starting. Commit interval 5 seconds
    [ 4.654047] EXT3-fs: mounted filesystem with ordered data mode.
    [ 8.628114] usb-storage: device scan complete
    [ 8.628590] scsi 4:0:0:0: Direct-Access WD 1600BMV External 1.05 PQ: 0 ANSI: 4
    [ 8.629445] sd 4:0:0:0: [sdb] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
    [ 8.630191] sd 4:0:0:0: [sdb] Write Protect is off
    [ 8.630194] sd 4:0:0:0: [sdb] Mode Sense: 21 00 00 00
    [ 8.630197] sd 4:0:0:0: [sdb] Assuming drive cache: write through
    [ 8.630817] sd 4:0:0:0: [sdb] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
    [ 8.631565] sd 4:0:0:0: [sdb] Write Protect is off
    [ 8.631568] sd 4:0:0:0: [sdb] Mode Sense: 21 00 00 00
    [ 8.631571] sd 4:0:0:0: [sdb] Assuming drive cache: write through
    [ 8.631575] sdb:<7>usb-storage: device scan complete
    [ 8.933968] scsi 5:0:0:0: Direct-Access Verbatim STORE N GO 5.00 PQ: 0 ANSI: 0 CCS
    [ 9.448997] udev: starting version 141
    [ 9.592989] parport_pc 00:06: reported by Plug and Play ACPI
    [ 9.593045] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
    [ 9.671372] Linux agpgart interface v0.103
    [ 9.692070] agpgart-amd64 0000:00:00.0: AGP bridge [10de/00e1]
    [ 9.692105] agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP
    [ 9.712125] agpgart-amd64 0000:00:00.0: AGP aperture is 512M @ 0xc0000000
    [ 9.728295] ACPI: I/O resource nForce2_smbus [0x5000-0x503f] conflicts with ACPI region SMRG [0x5000-0x5004]
    [ 9.728300] ACPI: Device needs an ACPI driver
    [ 9.728399] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
    [ 9.728458] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5040
    [ 9.739342] Linux video capture interface: v2.00
    [ 10.033976] end_request: I/O error, dev sr0, sector 0
    [ 10.033985] Buffer I/O error on device sr0, logical block 0
    [ 10.033993] Buffer I/O error on device sr0, logical block 1
    [ 10.033997] Buffer I/O error on device sr0, logical block 2
    [ 10.034000] Buffer I/O error on device sr0, logical block 3
    [ 10.048760] end_request: I/O error, dev sr0, sector 0
    [ 10.048769] Buffer I/O error on device sr0, logical block 0
    [ 10.097289] uvcvideo: Found UVC 1.00 device USB Video Camera (0471:2034)
    [ 10.098442] input: USB Video Camera as /devices/pci0000:00/0000:00:02.2/usb1/1-1/1-1:1.0/input/input5
    [ 10.112254] usbcore: registered new interface driver uvcvideo
    [ 10.112286] USB Video Class driver (v0.1.0)
    [ 10.121647] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 10.169131] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 10.420095] ppdev: user-space parallel port driver
    [ 10.506463] ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 20
    [ 10.506472] Intel ICH 0000:00:06.0: PCI INT A -> Link[LAUI] -> GSI 20 (level, low) -> IRQ 20
    [ 10.506647] Intel ICH 0000:00:06.0: setting latency timer to 64
    [ 10.539172] usbcore: registered new interface driver snd-usb-audio
    [ 10.828046] intel8x0_measure_ac97_clock: measured 54687 usecs
    [ 10.828050] intel8x0: clocking to 46875
    [ 10.981231] lp0: using parport0 (interrupt-driven).
    [ 11.088568] Adding 2996080k swap on /dev/sda5. Priority:-1 extents:1 across:2996080k
    [ 11.109327] sdb1
    [ 11.112390] sd 4:0:0:0: [sdb] Attached SCSI disk
    [ 11.112473] sd 4:0:0:0: Attached scsi generic sg3 type 0
    [ 11.647437] EXT3 FS on sda1, internal journal
    [ 12.819830] type=1505 audit(1244527176.338:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2047
    [ 12.890132] type=1505 audit(1244527176.410:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2051
    [ 12.890333] type=1505 audit(1244527176.410:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2051
    [ 12.890407] type=1505 audit(1244527176.410:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2051
    [ 12.890463] type=1505 audit(1244527176.410:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2051
    [ 13.020605] sd 5:0:0:0: [sdc] 7827456 512-byte hardware sectors: (4.00 GB/3.73 GiB)
    [ 13.021092] sd 5:0:0:0: [sdc] Write Protect is off
    [ 13.021096] sd 5:0:0:0: [sdc] Mode Sense: 23 00 00 00
    [ 13.021099] sd 5:0:0:0: [sdc] Assuming drive cache: write through
    [ 13.026117] sd 5:0:0:0: [sdc] 7827456 512-byte hardware sectors: (4.00 GB/3.73 GiB)
    [ 13.026591] sd 5:0:0:0: [sdc] Write Protect is off
    [ 13.026594] sd 5:0:0:0: [sdc] Mode Sense: 23 00 00 00
    [ 13.026596] sd 5:0:0:0: [sdc] Assuming drive cache: write through
    [ 13.026604] sdc: sdc1
    [ 13.073727] sd 5:0:0:0: [sdc] Attached SCSI removable disk
    [ 13.073810] sd 5:0:0:0: Attached scsi generic sg4 type 0
    [ 15.984660] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 15.984664] Bluetooth: BNEP filters: protocol multicast
    [ 15.996360] Bridge firewalling registered
    [ 16.954763] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 19
    [ 16.954778] pci 0000:01:00.0: PCI INT A -> Link[LNKE] -> GSI 19 (level, low) -> IRQ 19
    [ 17.054094] [drm] Initialized drm 1.1.0 20060810
    [ 17.078894] [drm] Initialized radeon 1.29.0 20080528 on minor 0
    [ 17.750223] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
    [ 17.750245] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
    [ 17.750280] pci 0000:01:00.0: putting AGP V3 device into 8x mode
    [ 18.060350] [drm] Setting GART location based on new memory map
    [ 18.060363] [drm] Loading R200 Microcode
    [ 18.060684] [drm] writeback test succeeded in 1 usecs
    [ 31.808013] eth0: no IPv6 routers present
    pippo@pippo-desktop:~$
    Ultima modifica di Carlo; 09-06-2009 alle 09:18

  10. #10
    L'avatar di Lomion
    Title
    Esperto
    Data Registrazione
    Dec 2007
    Età
    39
    Messaggi
    1,396

    Predefinito

    Ciao!

    Dunque dal dmesg non pare tu abbia una scheda audio lol in compenso hai degli errori di buffer su /dev/sr0 (lettore cd).
    Comqunque prova anche a darmi ciò che ti ritorna un

    Codice:
    sudo lspci
    ah e potresti anche provare a vedere se con "alsamixer" hai per caso dei canali in mute o se almeno riconosce la scheda
    E adesso aspetterò domani per avere nostalgia
    signora libertà signorina anarchia
    così preziosa come il vino così gratis come la tristezza, con la tua nuvola di dubbi e di bellezza.

  11. #11

    Title
    Nuovo Utente
    Data Registrazione
    Jun 2009
    Età
    77
    Messaggi
    9

    Predefinito richiesta aiuto

    Ciao,
    ti invio la videata risultante dal comando che mi hai suggerito.
    In quelle precedente, alla quale ho dato un'occhiata da profano, ho notato che in un rigo c'era: PNP:PS/2 appears to have AUX port disabled. If this is incorrect please boot with i8042.nopnp-.
    Può entrarci col problema nel senso che se l'aux non è abilitato lo spinotto degli altoparlanti non viene rilevato?
    Ho fatto la videata di alsamixer ed ho visto che c'erano dei canali con la scritta MM, che ho mutato in 00.
    Ancora grazie. Buona notte.
    Giuseppe
    Spoiler:

    00:00.0 Host bridge: nVidia Corporation nForce3 250Gb Host Bridge (rev a1)
    00:01.0 ISA bridge: nVidia Corporation nForce3 250Gb LPC Bridge (rev a2)
    00:01.1 SMBus: nVidia Corporation nForce 250Gb PCI System Management (rev a1)
    00:02.0 USB Controller: nVidia Corporation CK8S USB Controller (rev a1)
    00:02.1 USB Controller: nVidia Corporation CK8S USB Controller (rev a1)
    00:02.2 USB Controller: nVidia Corporation nForce3 EHCI USB 2.0 Controller (rev a2)
    00:05.0 Bridge: nVidia Corporation CK8S Ethernet Controller (rev a2)
    00:06.0 Multimedia audio controller: nVidia Corporation nForce3 250Gb AC'97 Audio Controller (rev a1)
    00:08.0 IDE interface: nVidia Corporation CK8S Parallel ATA Controller (v2.5) (rev a2)
    00:0a.0 IDE interface: nVidia Corporation nForce3 Serial ATA Controller (rev a2)
    00:0b.0 PCI bridge: nVidia Corporation nForce3 250Gb AGP Host to PCI Bridge (rev a2)
    00:0e.0 PCI bridge: nVidia Corporation nForce3 250Gb PCI-to-PCI Bridge (rev a2)
    00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
    00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
    00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
    00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
    01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01)
    01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) (rev 01)
    pippo@pippo-desktop:~$
    Ultima modifica di Carlo; 10-06-2009 alle 00:26

  12. #12
    L'avatar di Lomion
    Title
    Esperto
    Data Registrazione
    Dec 2007
    Età
    39
    Messaggi
    1,396

    Predefinito

    Citazione Originariamente Scritto da peppino29 Visualizza Messaggio
    Ciao,
    ti invio la videata risultante dal comando che mi hai suggerito.
    In quelle precedente, alla quale ho dato un'occhiata da profano, ho notato che in un rigo c'era: PNP:PS/2 appears to have AUX port disabled. If this is incorrect please boot with i8042.nopnp-.
    Può entrarci col problema nel senso che se l'aux non è abilitato lo spinotto degli altoparlanti non viene rilevato?
    Ho fatto la videata di alsamixer ed ho visto che c'erano dei canali con la scritta MM, che ho mutato in 00.
    Ancora grazie. Buona notte.
    Giuseppe
    Spoiler:

    00:00.0 Host bridge: nVidia Corporation nForce3 250Gb Host Bridge (rev a1)
    00:01.0 ISA bridge: nVidia Corporation nForce3 250Gb LPC Bridge (rev a2)
    00:01.1 SMBus: nVidia Corporation nForce 250Gb PCI System Management (rev a1)
    00:02.0 USB Controller: nVidia Corporation CK8S USB Controller (rev a1)
    00:02.1 USB Controller: nVidia Corporation CK8S USB Controller (rev a1)
    00:02.2 USB Controller: nVidia Corporation nForce3 EHCI USB 2.0 Controller (rev a2)
    00:05.0 Bridge: nVidia Corporation CK8S Ethernet Controller (rev a2)
    00:06.0 Multimedia audio controller: nVidia Corporation nForce3 250Gb AC'97 Audio Controller (rev a1)
    00:08.0 IDE interface: nVidia Corporation CK8S Parallel ATA Controller (v2.5) (rev a2)
    00:0a.0 IDE interface: nVidia Corporation nForce3 Serial ATA Controller (rev a2)
    00:0b.0 PCI bridge: nVidia Corporation nForce3 250Gb AGP Host to PCI Bridge (rev a2)
    00:0e.0 PCI bridge: nVidia Corporation nForce3 250Gb PCI-to-PCI Bridge (rev a2)
    00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
    00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
    00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
    00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
    01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01)
    01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) (rev 01)
    pippo@pippo-desktop:~$
    Ciao!

    Perfetto la tua scheda è rilevata, in alsamixer cambia da MM a 00 i canali PCM e center (o front non ricordo) e una volta fatto questo spostati con le frecce verso l'alto per alzare i livelli dei singoli canali.
    Prova così e vedi se senti qualche cosa dalle casse.

    Il problema dell'AUX non dovrebbe entrare enl discorso audio eprché è relativo alla presa PS/2 della tastiera e mouse
    E adesso aspetterò domani per avere nostalgia
    signora libertà signorina anarchia
    così preziosa come il vino così gratis come la tristezza, con la tua nuvola di dubbi e di bellezza.

  13. #13

    Title
    Nuovo Utente
    Data Registrazione
    Jun 2009
    Età
    77
    Messaggi
    9

    Predefinito richiesta aiuto

    Ciao,
    il settaggio con alsamixer lo avevo già fatto (tutti gli indicatori sono su 00 e le colonnine al massimo).
    Se introduco un cd nel lettore e apro con Rhythmbox nella videata c'è scritto "non in riproduzione" e se clicco sull'icona in alto a dx del riproduttore c'è scritto "interrotto".
    Magari sarà una scemenza, ma è da circa una settimana che sono seduto davanti al computer tentando tutte le strade.
    Speriamo, con la tua cortesia, di riuscire a tirare fuori un suono dalle casse!
    Giuseppe

  14. #14
    L'avatar di Lomion
    Title
    Esperto
    Data Registrazione
    Dec 2007
    Età
    39
    Messaggi
    1,396

    Predefinito

    Citazione Originariamente Scritto da peppino29 Visualizza Messaggio
    Ciao,
    il settaggio con alsamixer lo avevo già fatto (tutti gli indicatori sono su 00 e le colonnine al massimo).
    L'indicatore non dovrebbe segnare 00 se le colonnine sono al massimo

    Che nome della scheda ti da in alto a destra? Non capisco davvero che problemi abbia perché da come ne parli tu la scheda è rilevata correttamente e i volumi dovrebbero anche essere alti... mmm...

    Non hai mica un regolatore a potenziometro in giro per il pc (specie sui portatili) o stai mica usando una uscita ottica?
    E adesso aspetterò domani per avere nostalgia
    signora libertà signorina anarchia
    così preziosa come il vino così gratis come la tristezza, con la tua nuvola di dubbi e di bellezza.

  15. #15

    Title
    Nuovo Utente
    Data Registrazione
    Jun 2009
    Età
    77
    Messaggi
    9

    Predefinito richiesta aiuto

    Salve,
    ti riporto la videata risultante dal alsamixer:
    Card: NVidia CK8S
    Chip: realtek ALC850 rev.0
    View: (playback) capture all
    Item: quello risultante a secondo selezione
    Non si sono potenziometri in giro nè collegamenti ottici.
    Tutte le colonnine sono settate su un valore attorno a 77 ( lo 00 che ti dicevo prima riguardava quanto riportato alla base delle colonnine che mi sembrava essere il valore del volume).
    Ancora grazie per la pazienza.
    Piuttosto, potrebbe essere la scheda madre con integrata la scheda audio che non va?
    Ciao. Giuseppe

Pagina 1 di 2 12 UltimaUltima

Discussioni Simili

  1. Problema audio su ubuntu linux
    Di Bernaz nel forum Linux & Problemi
    Risposte: 6
    Ultimo Messaggio: 25-03-2009, 19:40
  2. [RISOLTO] Problema Audio Acer Aspire 5920g + Ubuntu 8.04
    Di Nandos nel forum Linux & Problemi
    Risposte: 4
    Ultimo Messaggio: 22-11-2008, 22:58
  3. Aiuto scheda audio!!
    Di Maddy_4e nel forum Schede Audio & Altoparlanti
    Risposte: 12
    Ultimo Messaggio: 12-10-2008, 16:52
  4. Scheda audio 16 bit creative pci 64v
    Di orb88 nel forum Schede Audio & Altoparlanti
    Risposte: 3
    Ultimo Messaggio: 22-09-2008, 18:35
  5. Audio e Video su uBuntu
    Di donnacassandra nel forum Linux & Problemi
    Risposte: 5
    Ultimo Messaggio: 27-08-2008, 13:35

Tag per Questa Discussione

Permessi di Scrittura

  • Tu non puoi inviare nuove discussioni
  • Tu non puoi inviare risposte
  • Tu non puoi inviare allegati
  • Tu non puoi modificare i tuoi messaggi
  •