Eccolo:

Robust Graphics Booster .................: [Turbo]
CPU Clock Ratio .........................: [8x]
Fine CPU Clock Ratio.....................: [+0.5]
CPU Frequency ...........................: 3.11GHz
Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: 366Mhz
PCI Express Frequency (Mhz) .........: [101]
C.I.A. 2.............................: [Disabled]
Advanced Clock Control [Press Enter]
CPU Clock Drive...........................: 800mv
PCI Express Clock Drive...................: 900mv
CPU Clock Skew (ps).......................: 0ps
MCH Clock Skew (ps).......................: 0ps
DRAM Performance Control
Performance Enhance....................: [Turbo]
Extreme Memory Profile (X.M.P.)........: [Disabled]
(G)MCH Frequency Latch.................: [Auto]
System Memory Multiplier ..............: 3.00A
Memory Frequency (Mhz) ................: 1098Mhz
DRAM Timing Selectable ................: [Manual]
Standard Timing Control
CAS Latency Time...............................: [5]
tRCD ..........................................: [5]
tRP...........................................: [5]
tRAS...........................................: [15]
Advanced Timing Control [Press Enter]
tRRD...........................................: [Auto]
tWTR...........................................: [Auto]
tWR............................................: [Auto]
tRFC...........................................: [Auto]
tRTP...........................................: [Auto]
Command Rate (CMD) ............................: [Auto]

Motherboard Voltage Control
Load-Line Calibration....................: [Enabled]
CPU Vcore….……….........1.2500V*.........: 1.31250
CPU Termination…...... 1.200V*...........: 1.30
CPU PLL………………….........1.500V*.......... .: 1.50
CPU Reference..........0.760V............: [Normal]
MCH/ICH
MCH Core……………..........1.100V............: 1.26
MCH Reference..…...….….0.760V............: [Auto]
MCH/DRAM Reference.....0.900V............: [Normal]
ICH I/O…………....……......1.50V............: [Normal]
ICH Core...............1.100V............: [Normal]
DRAM
DRAM Voltage ……........1.800V............: 2.00
DRAM Termination ...…..0.900V............: [Normal]
Channel A Address Vref 0.900V............: [Normal]
Channel B Address Vref 0.900V............: [Normal]
Advanced Settings
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect.................: [Enabled]
CPU Enhanced Halt (C1E)...................: [Enabled]
C2/C2E State Support......................: [Disabled]
x C4/C4E State Support....................: [Disabled]
CPU Thermal Monitor 2(TM2) ...............: [Enabled]
CPU EIST Function.........................: [Enabled]
Virtualization Technology.................: [Enabled]

*default


Come puoi vedere, ma mi sono accorto solo ora, che le ultime voci del Advanced settings sono diverse da come mi hai detto di metterle tu... può essere che siano quelle a dare problemi?
altra domanda, sai che le nuove cpu se arrivano a mettiamo 75° si spegono in autoamatico per non arrecare danni al sistema, ecco, non è che mettendo su disabled nelle ultime voci come mi hai detto te, disabilitiamo questa opzione che si spegne da solo? oppure cmq va quella?

Eccoti uno screen:


vorrei sapere, da core temp, mi dice che il VID è a 1,2500, ma quando ero a 3ghz era ancora a 1,2500... come può essere che non sale mai?

grazie aspetto con ansia